AgSmart
LIFT ARM BUSHING CATEGORY 2-3
SKU:
873-3009
1-1/8" ID X 1-7/16" OD X 1-3/4" long. Fits all Category 2 Draw Pins - Zinc plated.
AgSmart
LIFT ARM BUSHING CATEGORY 2-3
SKU:
873-3012
1-1/8" ID X 1-7/16" OD X 2-3/4" Long Lift Arm Reducing Bushing - Zinc plated.
AgSmart
HD ADJUSTABLE STABILIZER ARM
SKU:873-628
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads.
AgSmart
AgSmart Rachet Jack
SKU:
873-1541
Pin Hole - 1" pin size Min length 20" Max 28". 10,000 LB. push and 15000 LB. Pull. Replaces Woods 1005020.
AgSmart
AgSmart Stabilizer Pin & Lock Nut - 7/8" x 2-7/8"
Rated 5.0 out of 5 stars
1 Review
873-169
Stabilizer pin with nut and lock washer. 2-7/8" overall length, 7/8" diameter, 1/2" useable length, 1-1/4" thread length, 5/8" thread size. Replaces Ford 230044, Massey-Ferguson 18177M1.
AgSmart
LIFT ARM WELD-ON END CATEGORY 2
SKU:
873-1342
Lift arm repair end, straight, forged. Category II, 1-1/8" pin hole, 1-3/4" Ball width, 2-3/4" width at weld end, 4-3/4" overall length.
TISCO
Stabilizer Bar for Ford 230042, Massey Ferguson 181778M1
Rated 5.0 out of 5 stars
1 Review
230042R
AgSmart
CAT 2 LIFT ARM BALL-FD NRW
SKU:873-247
Category 2 (Narrow) - Ford Lift Arm Replacement Ball - Replaces Ford C5NN557B - Fits 3000, 4000, 5000 - 1 1/8" ID, 1-3/8" thru bore.
TISCO
Stabilizer Kit for Category 1, 3 Point Hitches
SKU:
SK100
Stabilizer kit for Category I 3 point hitch, 31-1/2" hole spacing. Contains 2 arms, 2 brackets, 2 stabilizer pins with nut and lock washer, 2 linch pins with chains.